Download Details

PE-X pipe and fittings must be protected from UV degradation as prolonged exposure to sunlight could affect the longevity of the material.

UV light cannot pass through polyethylene packaging or glazing, therefore sealed product packs or installed products within the building will not be at risk.

Short-term exposure to UV on building sites will not affect the PE-X products.

• Do not store uncovered PE-X products outside.

• Do not install PE-X product outside without insulation.

• In hot climates where insulation is unnecessary, do not install PE-X product outside without painting or covering to prevent UV damage.

Cut lengths of pipe should be stored flat on a suitable pipe rack.

Coils may be stored upright within suitable racks to ensure stability or laid flat and stacked vertically one on top of the other. When coils are stacked vertically the maximum recommended stack height is 2m coil packs.

Pack weights (kg)

Note
When transporting cut lengths or coils, do not allow the packs or bare product to drag along

Storing and handling fittings

Note
Do not push fingers into the push-fit sockets, the sharp stainless steel grip ring could be dangerous.

Fittings should be kept within the polythene bags wherever possible and stored in suitable racking.

Bare fittings should be stored in a clean dirt free environment.

When handling or storing fittings do not allow any objects to slide into the socket to avoid damage to the joint internals.