The system consist of the following items:

Code	Item Description	Barcode
EUFHVP1	15mm Danfoss valve	5011141109878
EUFHP3	Floor panel pack of 3 1071mm X 771mm X 50mm*	5011141109670
EUFHP5	Floor panel pack of 5 1071mm X 771mm X 50mm*	5011141109755
EUFHEI25	Edge insulation 150mm x 25m coil	5011141109793
EUFHS	Valve sensor head (spare)	5011141109854
* The floor area covered by each panel is 1050mm x 770mm (0.787m2)

A comprehensive range of Equator push-fit PE-X pipe and fittings is available, please refer to the Equator literature for further information.

An Underfloor Heating System, in simplest terms, is a radiator buried in your floor screed. Whereas radiators provide heat from a very small surface, which is normally very hot, underfloor heating transfers heat from a very large surface area, the whole floor, which is only slightly warmer than the room. Hot water is circulated through pipes embedded in the floor. The temperature of the water is automatically controlled by a valve, which ensures the floor surface temperature is between 25 - 28ºC.